1TL0001
BEIDE
| Quantity: | |
|---|---|
Rated output：0.55 ~ 315 kW
Frame size：80 ~ 355
Voltage and Frequency：support multiple voltage and frequency
Cooling method：IC416
Oiling device：FS180~355 motor as standard
Degree of protection：IP55
Degree of insulation：F
Coolant temperature：-15 ~ 40 ºC
Site altitude above see level：not exceed 1000 m
1TL0001 motors are suitable for pumps, fans, compressors, texitle machine and mechanical machine applications where variable speed is required.
The standard insulation of the 1TL0001 motors is designed such that operation is possible on the converter at mains voltage up to 460 V.
1TL0001 motors are capable for converter-fed operation with certain characteristics load, of which the load torque characteristics is referred in the following diagram:
At rated output with converter fed operation, the motors will be used in temperature class 155 (F). To prevent damage as a result of bearing currents, insulated bearings are recommended to be assembled for frame size 250 and above.
By usage with admissible torque and below, the motor can be operated with self cooling; by usage over the admissible torque line, the motor with forced ventilation is needed.
At operating speeds above rated speed the noise and vibration levels increase and the bearing life time reduce. Attention should be paid to the re-greasing intervals and the grease service life.
Rated output：0.55 ~ 315 kW
Frame size：80 ~ 355
Voltage and Frequency：support multiple voltage and frequency
Cooling method：IC416
Oiling device：FS180~355 motor as standard
Degree of protection：IP55
Degree of insulation：F
Coolant temperature：-15 ~ 40 ºC
Site altitude above see level：not exceed 1000 m
1TL0001 motors are suitable for pumps, fans, compressors, texitle machine and mechanical machine applications where variable speed is required.
The standard insulation of the 1TL0001 motors is designed such that operation is possible on the converter at mains voltage up to 460 V.
1TL0001 motors are capable for converter-fed operation with certain characteristics load, of which the load torque characteristics is referred in the following diagram:
At rated output with converter fed operation, the motors will be used in temperature class 155 (F). To prevent damage as a result of bearing currents, insulated bearings are recommended to be assembled for frame size 250 and above.
By usage with admissible torque and below, the motor can be operated with self cooling; by usage over the admissible torque line, the motor with forced ventilation is needed.
At operating speeds above rated speed the noise and vibration levels increase and the bearing life time reduce. Attention should be paid to the re-greasing intervals and the grease service life.
